EIGRP - Redistribution RIP - Belajar IT Bersama

Assalamualaikum wr wb

Alhamdulillah kita masih bisa bertemu sharing sharing tentunya di sinaubareng19 kali ini kita akan melanjutkan yang sebelumnya yaitu yang redistribute static, kali ini kita akan membahas tentang redistribute RIP, untuk topologi kita masih sama seprti yang sebelumnya yaitu seperti dibawah ini.

Pertama kita mulai mengkonfigurasi IP addressnya

R1(config)#int lo0
R1(config-if)#ip add 1.1.1.1 255.255.255.255
R1(config)#int se0/0
R1(config-if)#no sh
R1(config-if)#ip add 12.12.12.1 255.255.255.0

R2(config)#int lo0
R2(config-if)#ip add 2.2.2.2 255.255.255.255
R2(config-if)#int s0/0
R2(config-if)#no sh
R2(config-if)#ip add 12.12.12.2 255.255.255.0
R2(config-if)#int f0/0
R2(config-if)#no sh
R2(config-if)#ip add 23.23.23.2 255.255.255.0
R2(config-if)#ex

R3(config)#int lo0
R3(config-if)#ip add 3.3.3.3 255.255.255.255
R3(config-if)#int fa0/0
R3(config-if)#no sh
R3(config-if)#ip add 23.23.23.3 255.255.255.0
R3(config-if)#ex

Kemudian kita konfigurasi routing eigrp

R1(config)#router eigrp 10
R1(config-router)#no au
R1(config-router)#net 1.1.1.1 0.0.0.0
R1(config-router)#net 12.12.12.0 0.0.0.0
R1(config-router)#ex

R2(config)#router eigrp 10
R2(config-router)#no au
R2(config-router)#net 12.12.12.0 0.0.0.0
R2(config-router)#net 2.2.2.2 0.0.0.0
R2(config-router)#net 23.23.23.0 0.0.0.255

R3(config)#router eigrp 10
R3(config-router)#no au
R3(config-router)#net 3.3.3.3 0.0.0.0
R3(config-router)#net 23.23.23.0 0.0.0.0
R3(config-router)#ex

Selanjutnya kita konfigurasi interace loopback tambahan di router 3

R3(config)#int lo1
R3(config-if)#ip add 10.10.10.1 255.255.255.255

Selanjutnya kita konfiugrasi Routing RIP di router 3, epatnya di network lo1

R3(config)#router rip
R3(config-router)#ve 2
R3(config-router)#net 10.10.10.1
R3(config-router)#no au
R3(config-router)#redistribute eigrp 10 metric 10
R3(config-router)#ex

Selanjutnya di Eigrpnya kita redistribute RIP.

R3(config)#router eigrp 10
R3(config-router)#redistribute rip metric 1 1 1 1 1
R3(config-router)#ex

Selanjutnya pada router 1 kitacek tabel route dan lakukan ping

R1(config)#do sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     1.0.0.0/32 is subnetted, 1 subnets
C       1.1.1.1 is directly connected, Loopback0
     2.0.0.0/32 is subnetted, 1 subnets
D       2.2.2.2 [90/2297856] via 12.12.12.2, 03:31:38, Serial0/0
     3.0.0.0/32 is subnetted, 1 subnets
D       3.3.3.3 [90/2323456] via 12.12.12.2, 03:31:10, Serial0/0
     23.0.0.0/24 is subnetted, 1 subnets
D       23.23.23.0 [90/2195456] via 12.12.12.2, 03:31:52, Serial0/0
     10.0.0.0/32 is subnetted, 1 subnets
D EX    10.10.10.1 [170/2560537856] via 12.12.12.2, 00:00:05, Serial0/0
     12.0.0.0/24 is subnetted, 1 subnets
C       12.12.12.0 is directly connected, Serial0/0
R1(config)#

Selanjutnya lakukan ping

R1(config)#do ping 10.10.10.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/16/24 ms
R1(config)#